|
|
|
Michele
Chiumenti, PhD
|
|
Websites
|
|
|
|
|
|
|
Conferences
|
|
Plenary Lectures:
|
|
Qualification of DED metal
Additive Manufacturing by numerical simulation and AI-based monitoring
4º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2023)
July 26-28, 2023, Munich, Germany
Qualification of DED metal
Additive Manufacturing by numerical simulation and AI-based monitoring
The Frontiers of
High-End Additive Manufacturing 2023
June 25-27, 2023, Yanqi-Lake (Beijing), China
Developments in Additive Manufacturing Processes: Industrial Technologies
and Numerical Analyses
IX International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2021)
June 13-16, 2021, Sardinia island, Italy
Challenges and Scope in the Numerical Simulation of Additive
Manufacturing Processes
First Casablanca
International Conference on Additive Manufacturing (CASICAM 2021)
June 24-25, 2021, Casablanca, Morocco
Numerical framework for high
accuracy simulation of the FSW process
6th International
Conference on Scientific and Technical Advances on Friction Stir Welding
& Processing (FSWP 2019)
September 11-13, 2019, Louvain-la-Neuve, Belgium
Numerical Modeling
and Experimental Validation of AM Processes by Metal Deposition
Additive
Manufacturing Benchmarks 2018 (AM-Bench
2018)
June 18-21, 2018, Gaithersburg, Maryland, USA.
Numerical modeling of the AM
process by Metal Deposition and its Experimental Validation
1º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich, Germany.
A Novel Stress-Accurate FE Technology for Highly
Non-Linear Analysis with Incompressibility Constraint. Application to the
Numerical Simulation of the FSW Process
11º International
Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2013)
July 6-10,
2013, Shenyang,
China.
Una
panorámica sobre las posibilidades actuales de los métodos numéricos para la
simulación de procesos industriales de conformado de metales
11º Congreso Iberoamericano de Computación Aplicada a la
Industria de Procesos (CAIP 2013)
October 21-24, 2013, Lima, Perú.
Coupled thermo-mechanical
analysis for the numerical simulation of welding processes
III International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2009)
June 8-10, 2009, Ischia Island, Italy.
Avances
en Ingeniería Computacional: Simulación Numérica de Procesos Industriales
M. Chiumenti
3º Congreso Bolivariano de Ingeniería Mecánica (COBIM III)
July 22-24, 2003, Lima, Perú.
|
|
WCCM  Conference Series
|
|
Multiphysic and multiscale
modeling of Additive Manufacturing processes by metal deposition
M. Chiumenti, M. Cervera, S. Badia, E. Neiva,
E. Salsi and I. Setien
13º World Congress
on Computational Mechanics (WCCM XIII)
July 22-27, 2018, New York, USA.
Prediction of residual stresses
and distortions induced by the Additive Manufacturing process
M. Chiumenti, M. Cervera, C. Agelet de
Saracibar, N. Dialami, W. Huang, X. Lin, L. Ma and L. Wei
12º World
Congress on Computational Mechanics (WCCM XII)
July 24-29, 2016, Seoul, Korea.
Coupled thermo-mechanical
finite element technology for stress accurate analysis
M. Chiumenti, M. Cervera, R. Codina and C.
Agelet de Saracibar
11º World
Congress on Computational Mechanics (WCCM XI)
September 20-25, 2014, Barcelona, Spain.
Prediction of residual stresses
in FSW process
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
11º World
Congress on Computational Mechanics (WCCM XI)
September 20-25, 2014, Barcelona, Spain.
Encompassing Incompressibility
and Strain Localization in Plasticity with Mixed FE
L. Benedetti, M. Cervera, M. Chiumenti and R.
Codina
11º World
Congress on Computational Mechanics (WCCM XI)
September 20-25, 2014, Barcelona, Spain.
On the computational modelling
for frictional stir welding process (FSW) simulation
M. Chiumenti, M. Cervera, C. Agelet de
Saracibar, N. Dialami
10º World
Congress on Computational Mechanics (WCCM
X)
July 8-13, 2012, Sao Paulo, Brazil.
Mixed Stabilized Finite Element
Solution for Strain Localization Analysis
M. Cervera, M. Chiumenti and R. Codina
9º World Congress
on Computational Mechanics (WCCM IX)
July 19-23, 2010, Sydney, Australia.
Computational Modeling of Fsw
Processes
C. Agelet de Saracibar, M. Chiumenti, D.
Santiago, N. Dialami and G. Lombera
9º World Congress
on Computational Mechanics (WCCM IX)
July 19-23, 2010, Sydney, Australia
Thermo-Mechanical Modeling of
Multi-Pass Welding and Metal Deposition Processes
M. Cervera, M. Chiumenti and C. Agelet de
Saracibar
8º World Congress
on Computational Mechanics (WCCM
VIII)
June 30 – July 4,
2008, Venezia, Italia
Artificial Neural Networks for
the Solution of Optimal Shape Design Problems
R. Lopez, X. Diego, R.
Flores, M. Chiumenti and E. Oñate
8º World Congress
on Computational Mechanics (WCCM
VIII)
June 30 – July 4, 2008, Venezia,
Italia
|
|
ECCM by  Conference Series
|
|
Mixed Finite Elements for Strain Localization under Monotonic,
Cyclic and Dynamic Loading
G. Barbat, M. Cervera and M. Chiumenti
European Congress
on Computational Methods in Applied Science and Engineering ( ECCM
2018)
June 11-15, 2018, Glasgow, UK.
Piecewise Linear Norton-Hoff
Constitutive Law for Modeling FSW Processes
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
European Congress
on Computational Methods in Applied Science and Engineering ( ECCM
2016)
June 5-10, 2016, Crete Island, Greece.
Coupled thermo-mechanical finite
element technology for stress accurate analysis
M. Chiumenti, M. Cervera, R. Codina and C.
Agelet de Saracibar
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2014)
September 20-25, 2014, Barcelona, Spain.
Prediction of residual stresses
in FSW process
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2014)
September 20-25, 2014, Barcelona, Spain.
Encompassing Incompressibility
and Strain Localization in Plasticity with Mixed FE
L. Benedetti, M. Cervera, M. Chiumenti and R.
Codina
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2014)
September 20-25, 2014, Barcelona, Spain.
A novel three field mixed
finite element technology with OSS stabilization
M. Chiumenti, M. Cervera and R. Codina
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2012)
September 10-14, 2012, Vienna, Austria.
Mixed Stabilized Finite Element
Methods in Nonlinear Solid Mechanics
M. Chiumenti, M. Cervera and R. Codina
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2010)
May 16-21, 2010, Paris, France.
Thermo-Mechanical Modeling of
Multi-Pass Welding and Metal Deposition Processes
M. Cervera, M. Chiumenti and C. Agelet de
Saracibar
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2008)
June 30 – July 4,
2008, Venezia, Italia
Artificial Neural Networks for
the Solution of Optimal Shape Design Problems
R. Lopez, X. Diego, R.
Flores, M. Chiumenti and E. Oñate
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2008)
June 30 – July 4,
2008, Venezia, Italia
Softening, Localization and
Stabilization: Capture of Discontinuous Solutions in J2-Plasticity
M. Cervera, M. Chiumenti and C. Agelet de
Saracibar
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2004)
July 24 – 28, 2004, Jyväskylä, Finland.
Constitutive Modeling and
Numerical Simulation of Casting Materials
M. Chiumenti, M. Cervera, C.
Agelet de Saracibar , E. Oñate and G. Duffett
European Congress
on Computational Methods in Applied Science and Engineering (ECCM 2001)
June 26 – 29, 2001,
Cracow, Poland.
|
|
COMPLAS Conference Series
|
|
Thermo-mechanical simulation of
annealing heat treatment in laser powder bed fusion additive manufacturing
X. Lu, M. Chiumenti and M. Cervera
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
A scalable thermo-mechanical
framework for the part-scale analysis in metal additive manufacturing
processes
C. Moreira, M. Caicedo,
M. Cervera, M. Chiumenti and J. Baiges
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
Objectivity in the Finite
Element Analysis of Quasi-Brittle Failure Via Adaptive Mesh and Formulation
Refinement
G. Barbat, M. Cervera,
C. Moreira, H. Venghaus and M. Chiumenti
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
Experimental and Computational
Failure Analysis of Fused Filament Fabrication Parts
I. Rivet, N. Dialami, M. Cervera and M. Chiumenti
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
Thermal analysis of 3D printing
of metals in reference frame of laser
M. Slimani, M. Cervera and M. Chiumenti
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
Numerical Analysis of Wire
Laser Additive Manufacturing for Low Carbon Steels
J.M. Martínez and M. Chiumenti
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
A Comprehensive Framework for
Accurate and Effi
cient Simulation of Friction Stir Welding
Processes
H. Venghaus, M. Chiumenti, J. Baiges and D. Juhre
XVII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2023)
September 5-7, 2023, Barcelona, Spain.
FE Modelling of Structural Size
Effect in Quasi-Brittle Materials with Enhanced Accuracy
G.B. Barbat, M. Cervera and
M. Chiumenti
XVI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2021)
September 7-9, 2021, Barcelona, Spain.
Performance analysis of FFF
structures
N. Dialami, M. Chiumenti, M. Cervera, U. Chasco, G. Reyes-Pozo and M. A. Pérez
XVI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2021)
September 7-9, 2021, Barcelona, Spain.
An Automatic Octree Mesh
Generation based on Laser Activation Path for the Metal Deposition Process
in Additive Manufacturing
C.A. Moreira, J. Baiges,
M. Cervera and M. Chiumenti
XVI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2021)
September 7-9, 2021, Barcelona, Spain.
An Adaptive Finite Element
strategy for the numerical simulation of Additive Manufacturing processes
J. Baiges, M. Chiumenti, C.A.
Moreira, M. Cervera and R. Codina
XVI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2021)
September 7-9, 2021, Barcelona, Spain.
Stress, Strain and Dissipation
Accurate FE Technology for Metal Forming Applications
H. Venghaus, M. Chiumenti, J. Baiges and D. Juhre
XVI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2021)
September 7-9, 2021, Barcelona, Spain.
Mixed three-field FE
formulation for highly non-linear analysis encompassing the
incompressibility limit
M. Chiumenti and M. Cervera
XV International Conference
on Computational Plasticity. Fundamentals and Application (COMPLAS 2019)
September 3-5, 2019, Barcelona, Spain.
Defect prediction in Friction
Stir Welding
N. Dialami, M. Cervera and M. Chiumenti
XV International Conference
on Computational Plasticity. Fundamentals and Application (COMPLAS 2019)
September 3-5, 2019, Barcelona, Spain.
Strain localization analysis of
Hill’s orthotropic elastoplasticity: Analytical
and numerical appraisal
S. Kim, M. Cervera,
M. Chiumenti and J.Y. Wu
XV International Conference
on Computational Plasticity. Fundamentals and Application (COMPLAS 2019)
September 3-5, 2019, Barcelona, Spain.
Mixed FE Formulation for
Modelling Incompressible Damage with Thermo-Mechanical Coupling
Carlos Moreira, Gabriel Barbat, Michele
Chiumenti and Miguel Cervera
XV International Conference
on Computational Plasticity. Fundamentals and Application (COMPLAS 2019)
September 3-5, 2019, Barcelona, Spain.
A parallel finite-element
framework for the heat transfer analysis of metal additive manufacturing
S. Badia, M. Chiumenti, A. F.
Martín and E. Neiva
XIV International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2017)
September 5-7, 2017, Barcelona, Spain.
FE modelling of quasi-brittle
cracks in 2D and 3D with enhanced strain accuracy
M. Cervera, G.B.A. Barbat and M. Chiumenti
XIV International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2017)
September 5-7, 2017, Barcelona, Spain.
Torsion and bending failure of
skew notched beams: 3D numerical modelling of quasi brittle materials with
the mixed
strain-displacement finite
element method
L. Benedetti, M. Cervera and M.
Chiumenti
XIV International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2017)
September 5-7, 2017, Barcelona, Spain.
Numerical modelling of Selective
Laser Melting in Additive Manufacturing and its experimental validation
M. Chiumenti, E. Salsi, M. Cervera, I. Setien
and A. Echeverria
XIV International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2017)
September 5-7, 2017, Barcelona, Spain.
Experimental validation of
Friction Stir Welding (FSW) numerical model
N. Dialami, M. Cervera, M. Chiumenti, A.
Segatori, W. Osikowicz and B. Olsson
XIV International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2017)
September 5-7, 2017, Barcelona, Spain.
A mixed finite element
formulation for geotechnical problems involving localization in plasticity
L. Benedetti, M. Cervera and M. Chiumenti
XIII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2015)
September 1-3, 2015, Barcelona, Spain.
High-fidelity numerical
simulation of additive manufacturing processes
M. Chiumenti, W. Huang, X. Lin, M. Cervera, C.
Agelet de Saracibar, N. Dialami, L. Ma and L. Wei
XIII
International Conference on Computational Plasticity. Fundamentals and
Application (COMPLAS 2015)
September 1-3, 2015, Barcelona, Spain.
On the constitutive modelling
and friction laws used for the numerical simulation of Friction Stir
Welding process
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
XIII
International Conference on Computational Plasticity. Fundamentals and Application
(COMPLAS 2015)
September 1-3, 2015, Barcelona, Spain.
Mixed Finite Elements for slope
stability purposes
L. Benedetti, M. Cervera and M. Chiumenti
XII International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2013)
September 1-3, 2013, Barcelona, Spain.
A novel stress-accurate FE technology
for the numerical simulation of the FSW process
M. Chiumenti, N. Dialami, M. Cervera and C.
Agelet de Saracibar
XII International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2013)
September 1-3, 2013, Barcelona, Spain.
The pin shape effect on the
Friction Stir Welding process
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
XII International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2013)
September 1-3, 2013, Barcelona, Spain.
A novel FE approach to strain
localization problems based on a three field formulation
M. Chiumenti,
M. Cervera and R. Codina
XI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2011)
September 7-9, 2011, Barcelona, Spain.
Numerical simulation of
transient temperature and plastic dissipation in Friction Stir Welding
N. Dialami, M. Chiumenti, M. Cervera and C.
Agelet de Saracibar
XI International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2011)
September 7-9, 2011, Barcelona, Spain.
A strategy for the numerical
simulation of metal deposition and multi-pass welding processes
N. Dialami, M. Chiumenti, C. Agelet de
Saracibar and M. Cervera
X International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2009)
September 2-4, 2009, Barcelona, Spain.
Numerical Simulation of
Multi-Pass Welding and Metal Deposition Processes
M. Chiumenti, C. Agelet de
Saracibar and M. Cervera
IX International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2007)
September 5-7, 2007, Barcelona, Spain.
Coupled Thermo-Mechanical
Simulation for Aluminium Casting
M. Chiumenti, M. Cervera, C. Agelet
de Saracibar and Q. Valverde
VII International
Conference on Computational Plasticity. Fundamentals and Application (COMPLAS 2003)
April 7-10, 2003, Barcelona, Spain.
|
|
COUPLED
PROBLEMS Conference Series
|
|
Developments in Additive Manufacturing Processes: Industrial Technologies
and Numerical Analyses
M. Chiumenti (Plenary)
IX International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2021)
June 13-16, 2021, Sardinia island, Italy
Enhanced inherent strain method
for Additive Manufacturing simulation
M. Chiumenti, I. Setien
and A. Echeverria
VIII
International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019)
June 3-5, 2019, Sitges (Barcelona), Spain.
Effect of tool tilt angle on
the Friction Stir Welds
N. Dialami, M. Cervera and M.
Chiumenti
VIII
International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019)
June 3-5, 2019, Sitges (Barcelona), Spain.
Additive Manufacturing inherent
strain calibration strategy based on high-fidelity Finite Element models
I. Setien, M. Chiumenti and A. Echeverria
VIII
International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019)
June 3-5, 2019, Sitges (Barcelona), Spain.
Modelling of incompressible
damage with an enhanced-accuracy mixed thermo-mechanical formulation
G. Barbat,
C. Moreira, M. Cervera and M. Chiumenti
VIII
International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019)
June 3-5, 2019, Sitges (Barcelona), Spain.
Modelling of alloy phase
evolution during Additive Manufacturing and experimental validation
E. Salsi, M. Chiumenti and M. Cervera
VIII
International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019)
June 3-5, 2019, Sitges (Barcelona), Spain.
Speed-up strategy for the
analysis of FSW pin profile effect on torque and forces
N. Dialami, M. Cervera, M. Chiumenti and C. Agelet de Saracibar
VII International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2017)
June 12-14, 2017, Rhodes Island, Greece.
Finite Element Modelling of EB
Welding Process
M. Chiumenti, N. Dialami, M. Cervera and C.
Agelet de Saracibar
V International Conference
on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2013)
June 17-19, 2013, Ibiza Island, Spain.
Numerical simulation and
visualization of material flow in Friction Stir Welding via Particle
Tracing
N. Dialami, M. Chiumenti, M. Cervera, C.
Agelet de Saracibar, J.-P. Ponthot and P. Bussetta
V International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2013)
June 17-19, 2013, Ibiza Island, Spain.
Comparison of a Fluid and a
Solid Approach for the Numerical Simulation of
Friction Stir Welding with a
Non-Cylindrical Pin
P. Bussetta, N. Dialami, R. Boman, M. Chiumenti,
C. Agelet de Saracibar, M. Cervera and J-P. Ponthot
V International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2013)
June 17-19, 2013, Ibiza Island, Spain.
Coupled Thermo-mechanical
Analysis for Frictional Stir Welding Processes
M. Chiumenti, M. Cervera, C. Agelet de Saracibar and Narges Dialami
IV International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2011)
June 20-22, 2011, Kos Island, Greece.
On the Numerical Simulation of
3D Friction Stir Welding Processes
C. Agelet de Saracibar, M. Chiumenti, M. Cervera,
N. Dialami, D. Santiago and G. Lombera
IV International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2011)
June 20-22, 2011, Kos Island, Greece.
Coupled Thermo-Mechanical
Analysis for the Numerical Simulation of Welding Processes
M. Chiumenti (Plenary)
III International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2009)
June 8-10, 2009, Ischia Island, Italy.
Numerical Simulation of the
Metal Deposition Process
M. Chiumenti, M. Cervera and C. Agelet de
Saracibar
II International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2007)
May 21-23, 2007, Ibiza Island, Spain.
Coupled analysis in food
preservation processes
M. Chiumenti, C. Maggiolo, M. Cervera and C.
Agelet de Saracibar
I International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2005)
May 25-27, 2005, Santorini Island, Greece.
Coupled Thermomechanical
Behaviour for Metal Casting FE Analysis
M. Chiumenti, C. Agelet de
Saracibar and M. Cervera
I International
Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2005)
May
25-27, 2005, Santorini Island,
Greece.
|
|
PLASTICITY Conference Series
|
|
On the Mixed Three-Field
Formulation for Strain Localization Problems Encompassing the
Incompressible Limit
Michele Chiumenti, Miguel Cervera, Carlos Moreira, Gabriel
Barbat
International
Symposium on Plasticity, Damage and Fracture (PLASTICITY 2020)
January 3-9, 2020, Playa del Carmen, Mexico
Numerical Strategy for the
Simulation of Additive Manufacturing Process by SLM Technology
M. Chiumenti, M. Cervera, E. Salsi and E. Neiva
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2018)
January 3-9, 2018, San Juan, Puerto Rico
Numerical Simulation of Shaped
Metal Deposition Processes Close to the Industrial Manufacturing Technology
M. Chiumenti, W. Huang, X. Lin,
L. Wei,M. Cervera, C. Agelet de Saracibar and N. Dialami
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2015)
January 4-9, 2015, Montego Bay, Jamaica.
Visualization Of Material Flow for Frictional Stir Welding Processes
Simulation
M. Chiumenti, N. Dialami, J.P.
Ponthot, M. Cervera and C. Agelet de Saracibar
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2013)
January 2-7, 2013, Nassau, Bahamas.
On the Numerical Modeling of Frictional
Stir Welding Processes
M. Chiumenti, M. Cervera N. Dialami, and C.
Agelet de Saracibar
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2012)
January 3-8, 2012, San Juan, Puerto Rico.
On the material and process parameters
optimization in FSW processes
C. Agelet de Saracibar, R. López, B. Ducoeur, M. Chiumenti, B. de Meester
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2012)
January 3-8, 2012, San Juan, Puerto Rico.
Advances in the numerical
simulation of 3D FSW processes
C. Agelet de Saracibar, M. Chiumenti, M.
Cervera, N. Dialami, D. Santiago, G. Lombera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2011)
January 3-8, 2011, Puerto Vallarta, Mexico.
On the computational modeling
of FSW processes
C. Agelet de Saracibar, M. Chiumenti, D.
Santiago, M. Cervera, N. Dialami, G. Lombera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2010)
January 2-7, 2010, St. Kitts, St. Kitts and
Nevis.
Computational modeling of
multi-pass welding processes
M. Chiumenti, M. Cervera, C. Agelet
de Saracibar
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2009)
January 1-6, 2009 St. Thomas, US Virgin Islands.
Current developments on the
coupled thermomechanical modeling of metal casting processes
C. Agelet de Saracibar, M. Chiumenti, M.
Cervera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2008)
January 1-6, 2008 Kailua-Kona, Hawaii, USA.
Numerical simulation of
Multi-pass welding and Metal Deposition processes
M. Chiumenti, C. Agelet de
Saracibar and M. Cervera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2007)
June 2-6, 2007 Anchorage, Alaska, USA.
Stabilization Techniques and
Softening Behaviour in J2-Plasticity
M. Chiumenti, M. Cervera y C. Agelet
de Saracibar
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2005)
January 4-8, 2005 Kauai, Hawaii, USA.
On the localization of shear
bands using J2 damage models and multiscale stabilization techniques
C. Agelet de Saracibar, M. Cervera, M.
Chiumenti
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2005)
January 4-8, 2005 Kauai, Hawaii, USA.
On the numerical simulation of
aluminium casting processes
M. Chiumenti, C. Agelet de
Saracibar, M. Cervera y Q. Valverde
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2003)
January 4-8, 2003 Kauai, Hawaii, USA.
Stabilization of
incompressibility through orthogonal subgrid scales in finite strain
plasticity
C. Agelet de Saracibar, M. Chiumenti, M.
Cervera and Q. Valverde
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2003)
January 4-8, 2003 Kauai, Hawaii, USA.
Stabilization of
incompressibility in solid mechanics
M. Chiumenti, A. Huespe, C. Agelet de Saracibar y M. Cervera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2002)
January 3-8, 2002 Aruba, Antillas Holandesas,
USA.
A coupled thermo-mechanical
multi-phase constitutive model
M. Chiumenti, C. Agelet de
Saracibar, M. Cervera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2000)
July 17-21, 2000 Whistler, BC, Canada.
Computational modeling of laser
heat-forming processes
M. Chiumenti, C. Agelet de
Saracibar, M. Cervera
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 2000)
July 17-21, 2000 Whistler, BC, Canada.
On the constitutive modeling of
thermoplastic phase-change problems
C. Agelet de Saracibar, M. Cervera, M.
Chiumenti
International
Symposium on Plasticity and Its Current Applications (PLASTICITY 1999)
January
5-13, 1999 Cancun, Mexico.
|
|
SEMNI Conference Series
|
|
Frictional contact in Friction
Stir Welding
N. Dialami, M. Cervera and M. Chiumenti
Congreso de Métodos Numéricos en Ingeniería (CMN 2017)
July 3-5,
2017,Valencia, Spain
Mixed Finite Elements for Strain
Localization with Orthotropic Damage
G. Barbat, M. Cervera and M.
Chiumenti
Congreso de Métodos Numéricos en Ingeniería (CMN 2017)
July 3-5,
2017,Valencia, Spain
High-fidelity numerical
analysis of experimental tests on concrete specimens via mixed
strain-displacement FE
L. Benedetti, M. Cervera and M.
Chiumenti
Congreso de Métodos Numéricos en Ingeniería (CMN 2017)
July 3-5,
2017,Valencia, Spain
Mixed FE for strain
localization in plasticity
M. Cervera, L. Benedetti, M. Chiumenti and R. Codina
Congreso de Métodos Numéricos en Ingeniería (CMN 2015)
June 29 - July 2,
2015, Lisboa, Portugal
A novel mixed three-field FE
formulation for stress accurate results including the incompressible limit
M. Chiumenti, M. Cervera and R. Codina
Congreso de Métodos Numéricos en Ingeniería (CMN 2013)
June 25-28, 2013,
Bilabo, Spain
Mesh Objective Modelling of
Cracks Using Continuous Linear Strain and Displacement Interpolations
M. Cervera, M. Chiumenti and R. Codina
Congreso de Métodos Numéricos en Ingeniería (CMN 2013)
June 14-17, 2011,
Coimbra, Portugal
Numerical Modeling of Friction
Stir Welding Processes Using ALE Formulation
N. Dialami, M. Chiumenti, M. Cervera and C. Agelet de
Saracibar
Congreso de Métodos Numéricos en Ingeniería (CMN 2011)
June 14-17, 2011,
Coimbra, Portugal
Fully Coupled Thermo-Mechanical
Analysis of Multi-Pass Welding and Metal Deposition Processes
N. Dialami, M. Chiumenti, M. Cervera and C. Agelet de
Saracibar
Congreso de Métodos Numéricos en Ingeniería (CMN 2009)
June 29 - July 2, 2009, Barcelona,
Spain
Localización
en Fractura por Tensión Via un Modelo Local de
Daño Continuo
M.
Cervera and M. Chiumenti
Congreso de Métodos Numéricos en Ingeniería (CMN 2005)
July 4-7,
2005, Granada, Spain
Estimación
de Las Propopiedades Termofísicas
de Alimentos Mediante Optimización Inversa
C. Maggiolo, M. Chiumenti and E. Balsa-Canto
Congreso de Métodos Numéricos en Ingeniería (CMN 2005)
July 4-7,
2005, Granada, Spain
Localización de Bandas de Cortante via un Modelo Local de Daño Continuo Tipo J2
M. Cervera, M.
Chiumenti and C. Agelet de Saracíbar
Congreso de Métodos Numéricos en Ingeniería (CMN 2004)
May
31-June 2, 2004, Lisboa, Portugal
Formulación
Estabilizada de Elementos Finitos Triangulares y Tetraédricos para Problemas
de Incompresibilidad
en
Grandes Deformaciones
Q. Valverde, M. Chiumenti, C. Agelet de Saracíbar and M. Cervera
Congreso de Métodos Numéricos en Ingeniería (CMN 2004)
May
31-June 2, 2004, Lisboa, Portugal
Conservación de Alimentos: Nuevas
Metodologías y Herramientas Avanzadas para su Simulación
C. Maggiolo, M. Chiumenti and E. Balsa-Canto
Congreso de Métodos Numéricos en Ingeniería (CMN 2004)
May
31-June 2, 2004, Lisboa, Portugal
Una
Formulación Estabilizada para Plasticidad Incompresible Usando Triángulos y
Tetraedros con
Interpolaciones
Lineales en Desplazamientos y Presiones
M. Chiumenti, Q. Valverde, C. Agelet de Saracíbar and M. Cervera
Congreso de Métodos Numéricos
en Ingeniería (CMN 2002)
June 3-6, 2002, Madrid, Spain
Un
Modelo Constitutivo Termo-Mecánico para Sistemas Multi-Fase
M.
Chiumenti, C. Agelet de Saracibar and M. Cervera
Congreso de Métodos Numéricos
en Ingeniería (CMN 1999)
June 7-10, 1999, Seville, Spain
|
|
Sim-AM Conference Series
|
|
Qualification of DED metal
Additive Manufacturing by numerical simulation and AI-based monitoring
M. Chiumenti, A. Molotnikov,
T. Herzog, C. Moreira, M. Caicedo and M. Cervera
4º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2023)
July 26-28, 2023, Munich, Germany.
Substrate design to avert
stress accretion in additive manufacturing: Numerical and experimental
predictions
X. Lu, M. Chiumenti, M. Cervera and X. Lin
4º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2023)
July 26-28, 2023, Munich, Germany.
HPC framework for the
thermo-mechanical simulation of DED Additive Manufacturing processes
M. Chiumenti, J. Baiges, M. Cervera, R. Codina, M. Caicedo,
C.A. Moreira and J.M. Martinez
3º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2021)
September 1-3, 2021, Glasgow, UK.
Enhanced inherent strain method
applied to bridge-like structure
I. Setien, M. Chiumenti and A. Echeverria
2º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2019)
September 11-13, 2019, Pavia, Italy.
FEMPAR-AM: A parallel FE
framework for the simulation of powder-bed metal additive manufacturing
processes
E. Neiva, S. Badia,
A.F. Martín, F. Verdugo and M. Chiumenti
2º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2019)
September 11-13, 2019, Pavia, Italy.
Numerical modeling
of the AM process by Metal Deposition and its Experimental Validation
M. Chiumenti, M. Cervera, S. Badia, E. Neiva
and E. Salsi
1º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich, Germany.
Modeling of Microstructure
evolution in Additive Manufacturing processes of Ti6Al4V
E. Salsi, M. Chiumenti and M. Cervera
1º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich, Germany.
Parallel finite-element
analysis of heat transfer in AM processes by metal deposition
S. Badia, M. Chiumenti, A.F. Martin and E. Neiva
1º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich, Germany.
Comparison of numerical
methodologies for distortion prediction in Selective Laser Melting
and their application to
validation cases
I. Setien, M. Chiumenti and A.
Echeverria
1º International
Conference on Simulation for Additive Manufacturing (Sim-AM 2017)
October 11-13, 2017, Munich, Germany.
|
|
Other Conference
|
|
Numerical Modeling and
Experimental Validation of AM Processes by Metal Deposition
M. Chiumenti, M. Cervera, S. Badia, E. Neiva, E.
Salsi and I. Setien.
Additive
Manufacturing Benchmarks 2018 (AM-Bench
2018)
June 18-21, 2018, Gaithersburg, Maryland, USA.
FEMPAR-AM: A parallel
Finite-Element Framework for the simulation of Metal Additive Manufacturing
E. Neiva, S. Badia, M. Chiumenti, A.F.
Martín, F. Verdugo
Additive
Manufacturing Benchmarks 2018 (AM-Bench
2018)
June 18-21, 2018, Gaithersburg, Maryland, USA.
3D Numerical simulation of
Friction Stir Welding processes with non-cylindrical pins: comparison of a
fluid and a solid approach
P. Bussetta, N. Dialami, M. Chiumenti, C.
Agelet de Saracibar, M. Cervera, and J.P. Ponthot
17º International
conference on Advances in Material and Processing Technologies (AMPT-2014)
February 20,
2014, Dubaï, United Arab Emirates
A Numerical Model For The
Simulation Of Multi-Pass Welding And Metal Deposition Processes
M. Chiumenti, M. Cervera and C. Agelet de
Saracibar
1º African
Conference on Computational Mechanics (AfriCOMP
2009)
January 7-11, 2009, Sun City, South Africa
A Coupled Thermo-Mechanical Multi-Phase Constitutive Model
M. Chiumenti, C. Agelet de
Saracibar and M. Cervera
1st Conference
for Automatic Process Optimization in Materials Technology (APOMAT-2005)
May 30,
2005, Morschasch, Switzerland
|
|
