tiltupc_color_rgb

http://www.cimne.com/cvdata/cntr2/dtos/img/modls/web-cimne/header.pngCIMNE

etsccpb-logoetseccpb

 

 

 

Michele Chiumenti

Michele Chiumenti, PhD

Websites

 

 

 

 

 

Personal data

Publications

Conferences

Projects

 

 

 

Papers in peer-reviewed Journals

Submitted

 

 

 

86.    On the mechanics of strain localization in plasticity: Isotropic and orthotropic, elasto- and rigid-plastic, associated and non-associated models

         M. Cervera, J.Y. Wu, S. Kim and M. Chiumenti           

         Journal of the Mechanics and Physics of Solids (2020) submitted

 

85.    Effect of the building strategy on the thermomechanical response of Ti-6Al-4V rectangular parts manufactured by laser directed energy deposition

         X. Lu, M. Cervera, M. Chiumenti, J. Li, X. Ji, G. Zhang and X. Lin             

         Metals (2020) submitted

 

84.    Printing pattern based material characterization and enhanced performance analysis of FFF components:

         Experimental and computational validation

         N. Dialami, M. Chiumenti, M. Cervera, U. Chasco, G. Reyes-Pozo and M. A. Pérez

         Material & Design (2020) submitted

 

83.    Substrate design to minimize residual stresses in Additive Manufacturing

         X. Lu, X. Lin, M. Chiumenti, M. Cervera, J. Li, L. Ma, E. Liang    

         Material & Design (2020) submitted

 

82.    Accurate and locking-free analysis of beams, plates and shells using solid elements

         S. Saloustros, M. Cervera, S. Kim, S and M. Chiumenti,

         Computational Mechanics (2020) submitted

 

81.    An Adaptive Finite Element strategy for the numerical simulation of Additive Manufacturing processes

         J. Baiges M., Chiumenti, C.A. Moreira, M. Cervera, M. And R. Codina      

         Additive Manufacturing (2020) submitted

 

80.    Stress, Strain and dissipation accurate 3-field formulation for non-linear isochoric deformation

         M. Chiumenti,  M. Cervera, C.A. Moreira and G.A. Barbat          

         Finite Elements in Analysis and Design (2020) submitted

 

 

In press

 

79.    Numerical and experimental analysis of the structural performance of AM components fabricated by Fused Filament Fabrication technique

         N. Dialami, M. Chiumenti,  M. Cervera, R. Rossi, U. Chasco and M. Domingo

         International Journal of Mechanics and Materials in Design, (2020), in press

https://doi.org/10.1007/s10999-020-09524-8

 

 

Published

78.    Analysis of contact conditions and its influence on strain rate and temperature in Friction Stir Welding

         D. Andrade, C. Leitao, N. Dialami, M. Chiumenti, D. Rodrigues  

         International Journal of Mechanical Sciences, 191 (2020) 106095

https://doi.org/10.1016/j.ijmecsci.2020.106095

 

77.    Structural size effect: experimental, theoretical and accurate computational assessment

         G.B. Barbat,M.Cervera,M.Chiumenti,E.Espinoza

         Engineering Structures, 213 (2020) 110555

https://doi.org/10.1016/j.engstruct.2020.110555

 

76.    Defect Formation and Material Flow in Friction Stir Welding

         N. Dialami, M. Cervera and M. Chiumenti

         European Journal of Mechanics / A Solids, 80 (2020) 103912

https://doi.org/10.1016/j.euromechsol.2019.103912

 

75.    Architecture of a multi-crack model with full closing, reopening and sliding capabilities

         M. Cervera, G.B. Barbat and M. Chiumenti

         Computational Mechanics, 65 (2020) 1593–1620

https://doi.org/10.1007/s00466-020-01836-y

 

74.    Strain localization analysis of Hill's orthotropic elastoplasticity: Analytical results and numerical verification

         M. Cervera, J.Y. Wu, M. Chiumenti and S. Kim

         Computational Mechanics, 65 (2020) 533–554

https://doi.org/10.1007/s00466-019-01782-4

 

73.    Parametric shape optimization for combined additive-subtractive manufacturing

         L. Tamellini, M. Chiumenti, C. Altenhofen, M. Attene, O. Barrowclough, M. Livesu, F. Marini, M. Martinelli and V. Skytt

         JOM - The Journal of the Minerals, Metals & Materials Society (TMS), 72 (2020) 448–457

https://doi.org/10.1007/s11837-019-03886-x

 

72.    Modelling Torque and Temperature in Friction Stir Welding of Aluminium Alloys

         D.G. Andrade, C. Leitao, N. Dialami, M. Chiumenti and D. Rodrigues

         International Journal of Mechanical Sciences, 182 (2020) 105725

https://doi.org/10.1016/j.ijmecsci.2020.105725

 

71.    Numerical modelling of heat transfer and experimental validation in Powder-Bed Fusion with the Virtual Domain Approximation

         E. Neiva, M. Chiumenti, M. Cervera, E. Salsi, G. Piscopo, S. Badia, A.F. Martin, Z. Chen, C. Lee, and C. Davies

         Finite Elements in Analysis and Design, 168 (2020) 103343

https://doi.org/10.1016/j.finel.2019.103343

 

70.    A scalable parallel finite element framework for growing geometries. Application to metal additive manufacturing

         E. Neiva, S. Badia, A.F. Martin and M. Chiumenti

         International Journal for Numerical Methods in Engineering, 119 (2019) 1098-1125

https://doi.org/10.1002/nme.6085

 

69.    Empirical methodology to determine inherent strains in additive manufacturing

         I. Setien, M. Chiumenti, S. van der Veen, M. San Sebastian, F. Garciandía and A. Echeverría

         Computers and Mathematics with Applications, 78 (2019) 2282-2295

https://doi.org/10.1016/j.camwa.2018.05.015

 

68.    Residual stresses and distortion of rectangular an S-shaped Ti-6Al-4V Laser Solid Forming parts: modelling and experimental calibration

         X. Lu, X. Lin, M. Chiumenti, M. Cervera, Y. Hu, X. Ji, H. Yang and W. Huang

         Additive Manufacturing, 26 (2019) 166-179

https://doi.org/10.1016/j.addma.2019.02.001

 

67.    In situ measurements and thermo-mechanical simulation of Ti–6Al–4V laser solid forming processes

         X. Lu, X. Lin, M. Chiumenti, M. Cervera, Y. Hu , J. Li, L. Ma and W. Huang

         International Journal of Mechanical Sciences, 153-154 (2019) 119-130

https://doi.org/10.1016/j.ijmecsci.2019.01.043

 

66.    Prediction of joint line remnant defect in friction stir welding

         N. Dialami, M. Cervera, M. Chiumenti and A. Segatori

         International Journal of Mechanical Sciences, 151 (2019) 61–69

https://doi.org/10.1016/j.ijmecsci.2018.11.012

 

65.    Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding

         N. Dialami, M. Cervera and M. Chiumenti

         Metals, (2019) 9(1), 28

https://doi.org/10.3390/met9010028

 

64.    Integrated Computational Materials Engineering in Solar Plants: The Virtual Materials Design Project

         F. Montero-Chacón, M. Chiumenti, J. Segurado and M. Doblaré

         JOM - The Journal of the Minerals, Metals & Materials Society (TMS), 70(9), (2018) 1659–1669

https://doi.org/10.1007/s11837-018-2970-5

 

63.    Modeling of microstructure evolution in Additive Manufacturing processes of Ti-6Al-4V

         E. Salsi, M. Chiumenti and M. Cervera

         Metals - Open Access Metallurgy Journal, (2018) 8, 633

https://doi.org/10.3390/met8080633

 

62.    Numerical analysis of the manufacturing processes of a mock-up of the ITER NHF First Wall Panel

         J.M. Gonzalez, M. Chiumenti, M. Cervera, C.Agelet de Saracibar, F. Samaniego I. Cobo        

         Fusion Engineering and Design 135 (2018) 65–73

https://doi.org/10.1016/j.fusengdes.2018.07.012

 

61.    A phenomenological model for the solidification of eutectic and hypoeutectic alloys including recalescence and undercooling

         M. Chiumenti, M. Cervera, E. Salsi and A. Zonato

         Journal of Heat Transfer, 8(140) (2018)

https://doi.org/10.1115/1.4039991

 

60.    Numerical Modelling of Microstructure Evolution in Friction Stir Welding (FSW)

         N. Dialami, M. Cervera and M. Chiumenti,

         Metals - Open Access Metallurgy Journal, 7(183) (2018)

https://doi:10.3390/met8030183

 

59.    Finite element analysis and experimental validation of the thermomechanical behavior in laser solid forming of Ti-6Al-4V

         X. Lu, X. Lin, M. Chiumenti, M. Cervera, J. Li, L. Ma, L. Wei, Y. Hu and W. Huang

         Additive Manufacturing, 21 (2018) 30–40

https://doi.org/10.1007/s10704-018-0261-3

 

58.    Appraisement of planar, bending and twisting cracks in 3D with isotropic and orthotropic damage models

         G.B. Barbat, M. Cervera and M. Chiumenti

         International Journal of Fracture, 210 (2017) 45–79

https://doi.org/10.1007/s10704-018-0261-3

 

57.    Finite element modeling of quasi-brittle cracks in 2D and 3D with enhanced strain accuracy

         M. Cervera, G.B. Barbat and M. Chiumenti

         Computational Mechanics,  60 (2017) 767–796

https://doi.org/10.1007/s00466-017-1438-8

 

56.    Experimental validation of a FSW model with an enhanced friction law: Application to threaded cylindrical pin tool

         N. Dialami, M. Chiumenti, M. Cervera, A. Segatori, W. Osikowicz

         Metals - Open Access Metallurgy Journal, 7(491) (2017)

https://doi.org/10.3390/met7110491

 

55.    Numerical Modelling and Experimental Validation in Selective Laser Melting

         M. Chiumenti, E. Neiva, E. Salsi, M. Cervera, S. Badia, J. Moya, Z. Chen, C. Lee, and C. Davies

         Additive Manufacturing,18 (2017) 171–185

https://doi.org/10.1016/j.addma.2017.09.002

 

54.    3D Numerical Modelling of Twisting Cracks Under Bending and Torsion of Skew Notched Beams

         L. Benedetti, M. Cervera and M. Chiumenti

         Engineering Fracture Mechanics 176 (2017) 235–256

http://dx.doi.org/10.1016/j.engfracmech.2017.03.025

 

53.    Enhanced friction model for Friction Stir Welding (FSW) analysis: Simulation and experimental validation

         N. Dialami, M. Chiumenti, M. Cervera, A. Segatori, W. Osikowicz

         International Journal of Mechanical Sciences, 133 (2017) 555-567

https://doi.org/10.1016/j.ijmecsci.2017.09.022

 

52.    PFEM formulation for thermo-coupled FSI analysis. Application to nuclear core melt accident

         A. Franci, E.Oñate, JM. Carbonell, M. Chiumenti and K. Yamamura

         Computer Methods in Applied Mechanics and Engineering, 325 (2017) 711–732

https://doi.org/10.1016/j.cma.2017.07.028

 

51.    Numerical simulation and experimental calibration of Additive Manufacturing by blown powder technology. Part I: thermal analysis

         M. Chiumenti, X. Lin, M. Cervera, W. Lei, Y. Zheng and W. Huang

         Rapid Prototyping Journal, 23(2) (2017) 448-463

https://doi.org/10.1108/RPJ-10-2015-0136

 

50.    Una formulación mixta estabilizada explícita para plasticidad con localización de deformaciones

         N. Lafontaine, M. Cervera, R. Rossi and M. Chiumenti

         Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 22(3-4) (2017) 250-261

http://dx.doi.org/10.1016/j.rimni.2016.06.001

 

49.    Analysis of the effect of provisional ties in the construction and current deformation of Mallorca cathedral

         L. Pelà, J. Bourgeois, P. Roca, M. Cervera and M. Chiumenti

         International Journal of Architectural Heritage, 10(4) (2016) 418–437

http://dx.doi.org/10.1080/15583058.2014.996920

 

48.    Local-global strategy for the prediction of residual stresses in FSW processes

         N. Dialami, M. Cervera, M. Chiumenti and C. Agelet de Saracibar.

         International Journal of Advanced Manufacturing Technology, (2016) 1-13

http://dx.doi.org/10.1007/s00170-016-9016-3

 

47.    Explicit mixed strain-displacement finite elements for compressible and quasi-incompressible elasticity and plasticity

         M. Cervera, N. Lafontaine, R. Rossi and M. Chiumenti.

         Computational Mechanics, 58(3) (2016) 511-532

http://dx.doi.org/10.1007/s00466-016-1305-z

 

46.    Challenges in thermo-mechanical analysis of Friction Stir Welding processes

         N. Dialami, M. Chiumenti, M. Cervera and C. Agelet de Saracibar.

         Archives of Computational Methods in Engineering, (2016) 1-37

         http://dx.doi.org/10.1007/s11831-015-9163-y

 

45.    Numerical modeling of the electron beam welding and its experimental validation

         M. Chiumenti, M. Cervera, N. Dialami, B. Wu, J. Li and C. Agelet de Saracibar.

         Finite Elements in Analysis and Design, 121 (2016) 118-133

http://dx.doi.org/10.1016/j.finel.2016.07.003i

 

44.    High-fidelity prediction of crack formation in 2D and 3D pullout tests

         L. Benedetti, M. Cervera and M. Chiumenti.

         Computers and Structures, 172 (2016) 93-109.

http://dx.doi.org/10.1016/j.compstruc.2016.05.001.

 

43.    Formulación mixta estabilizada explícita de elementos finitos para sólidos compresibles y quasi-incompresibles

         N. Lafontaine, R. Rossi, M. Cervera and M. Chiumenti

         Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 169 (2015)

http://dx.doi.org/10.1016/j.rimni.2015.09.003

 

42.    3D numerical models of FSW processes with non-cylindrical pin

         P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera and J-P. Ponthot

         Advances in Materials and Processing Technologies, 1(3-4) (2015) 275-287

https://doi.org/10.1080/2374068X.2015.1121035

 

41.    3D numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin

         P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, R. Boman and J.P. Ponthot

         Advanced Modeling and Simulation in Engineering Sciences, 2:27 (2015) 1-19

https://doi.org/10.1186/s40323-015-0048-2

          

40.    Mixed stabilized finite element methods in nonlinear solid mechanics. Part III: Compressible and incompressible plasticity

         M. Cervera, M. Chiumenti, L. Benedetti and R. Codina.

         Computer Methods in Applied Mechanics and Engineering, 285 (2015) 752-775

https://doi.org/10.1016/j.cma.2014.11.040

 

39.    Explicit mixed strain-displacement finite element for dynamic geometrically non-linear solid mechanics

N.M. Lafontaine, R. Rossi, M. Cervera and M. Chiumenti

Computational Mechanics, 55 (2015) 543-559

https://doi.org/10.1007/s00466-015-1121-x

 

38.    A mixed three-field FE formulation for stress accurate analysis including the incompressible limit

         M. Chiumenti, M. Cervera and R. Codina.

         Computer Methods in Applied Mechanics and Engineering, 283 (2015) 1095-1116

https://doi.org/10.1016/j.cma.2014.08.004

 

37.    Stress-accurate mixed FEM for soil failure under shallow foundations involving strain localization in plasticity

         L. Benedetti, M. Cervera and M. Chiumenti

         Computers and Geotechnics, 64 (2015) 32–47

https://doi.org/10.1016/j.compgeo.2014.10.004

 

36.    A localized damage model for Orthotropic Materials

         L. Pelà, M. Cervera, S. Oller and M. Chiumenti

         Engineering Fracture Mechanics, 124–125 (2014) 196-216

https://doi.org/10.1016/j.engfracmech.2014.04.027

 

35.    Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes

         C. Agelet de Saracibar, M. Chiumenti, M. Cervera, N. Dialami and A. Seret

         Archives of Computational Methods in Engineering, 21 (2014) 3-37

https://doi.org/10.1007/s11831-014-9094-z

 

34.    Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin

         P. Bussetta, N. Dialami, R. Boman, M. Chiumenti, C. Agelet de Saracibar, M. Cervera and J-P. Ponthot

         Steel Research International, 85 (2014) 968–979

https://doi.org/10.1002/srin.201300182

 

 

33.    Material Flow Visualization in Friction Stir Welding via Particle Tracing

         N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar and J.P. Ponthot

         International Journal of Material Forming, 8(2) (2013) 167-181

https://doi.org/10.1007/s12289-013-1157-4

 

32.    An apropos kinematic framework for the numerical modelling of Friction Stir Welding

         N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar

         Computers and Structures, 117 (2013) 48-57.

https://doi.org/10.1016/j.compstruc.2012.12.006

 

31.    Numerical Modeling of Frictional Stir Welding Processes

         M. Chiumenti, M. Cervera, C. Agelet de Saracibar, N. Dialami

         Computer Methods in Applied Mechanics and Engineering, 254 (2013) 353-369.

 https://doi.org/10.1016/j.cma.2012.09.013

 

30.    Continuum FE models for the analysis of Mallorca Cathedral

         P. Roca, M. Cervera, L. Pelà, R. Clemente, M. Chiumenti

         Engineering Structures, 46 (2013) 653-670.

https://doi.org/10.1016/j.engstruct.2012.08.005

 

29.    Relationship between the 3D porosity and ß-phase distributions and the mechanical properties of a high pressure die cast AZ91 Mg alloy

         S. Biswas, F. Sket, M. Chiumenti, I. Gutiérrez-Urrutia, J.M. Molina-Aldareguía and M.T. Pérez-Prado.

          Metallurgical and Materials Transaction A, 44(9) (2013) 4391-4403.

https://doi.org/10.1007/s11661-013-1783-y

 

28.    Un Modelo Numérico para la Simulación de Disolución de Precipitados en Aleaciones de Aluminio con Endurecimiento utilizando Redes Neuronales

         C. Agelet de Saracibar, R. López, B. Ducoeur , M. Chiumenti and B. de Meester

         Revista Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 29(1) (2013) 29–37.

https://doi.org/10.1016/j.rimni.2012.02.003

 

27.    Viscoelasticity and damage model for creep behaviour of historical masonry structures

         P. Roca, M. Cervera, L. Pelà, R. Clemente, M. Chiumenti

         The Open Civil Engineering Journal, 6(1-M7) (2012) 188-199.

 

26.    Benchmarking on bifurcation and localization in J2 plasticity for plane stress and plane strain conditions

         M. Cervera, M. Chiumenti, D. Di Capua

         Computer Methods in Applied Mechanics and Engineering, 241-244 (2012) 206-224.

https://doi.org/10.1016/j.cma.2012.06.002

 

25.    Modeling the effect of storage temperature on the respiration rate and texture of fresh cut pineapple

         S. Benítez, M. Chiumenti, F. Sepulcre, I. Achaerandio and M. Pujolá.

          Journal of Food Engineering, 113 (2012) 527–533.

https://doi.org/10.1016/j.jfoodeng.2012.07.022

 

24.    Mesh objective modeling of cracks using continuous linear strain and displacement interpolations

         M. Cervera, M. Chiumenti, R. Codina

         International Journal for Numerical Methods in Engineering, 87 (2011) 962-987.

https://doi.org/10.1002/nme.3148

 

23.    Mixed stabilized finite element methods in nonlinear solid mechanics. Part II: Strain localization

         M. Cervera, M. Chiumenti and R. Codina.

         Computer Methods in Applied Mechanics and Engineering, 199 (2010) 2571-2589.

https://doi.org/10.1016/j.cma.2010.04.005

 

22.    Mixed stabilized finite element methods in nonlinear solid mechanics. Part I: Formulation

         M. Cervera, M. Chiumenti and R. Codina.

         Computer Methods in Applied Mechanics and Engineering, 199 (2010) 2559-2570.

https://doi.org/10.1016/j.cma.2010.04.006

 

21.    Finite element modeling of multi-pass welding and shaped metal deposition processes

         M. Chiumenti, M. Cervera, A. Salmi,  C. Agelet de Saracibar, N. Dialami and K. Matsui

         Computer Methods in Applied Mechanics and Engineering, 199 (2010) 2343-2359.

https://doi.org/10.1016/j.cma.2010.02.018

 

20.    Modelado termomecánico del proceso de Friction Stir Welding utilizando la geometría real de la herramienta

         D. Santiago, G. Lombera, S. Urquiza, C. Agelet de Saracibar, M. Chiumenti

         Revista Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 26 (2010) 293-303.

 

19.    Size effect and localization in J2 plasticity

         M. Cervera and M. Chiumenti,

         International Journal of Solids and Structures, 46 (2009) 3301-3312.

https://doi.org/10.1016/j.ijsolstr.2009.04.025

 

18.    On the Numerical modeling of the thermomechanical contact for metal casting analysis

         M. Chiumenti, C. Agelet de Saracibar and M. Cervera.

         Journal of Heat Transfer, 130(6) (2008) 061301.

https://doi.org/10.1115/1.2897923

 

17.    Modeling Precipitate Dissolution in Hardened Aluminium Alloys using Neural Networks

         R. Lopez, B. Ducoeur, M. Chiumenti, B. de Meester and C. Agelet de Saracibar

         Int. Journal of Material Forming, 1 (2008) 1291-1294.

https://doi.org/10.1007/s12289-008-0139-4

 

16.    Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en grandes deformaciones

         Q. Valverde, M. Chiumenti, C. Agelet de Saracibar and M. Cervera

         Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 22(3) (2006) 335-348.

 

15.    Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique

         M. Cervera and M. Chiumenti,

         Computer Methods in Applied Mechanics and Engineering, 196 (2006) 304-320.

https://doi.org/10.1016/j.cma.2006.04.008

 

14.    Current developments on the coupled thermomechanical computational modeling of metal casting processes

         C. Agelet de Saracibar, M. Chiumenti and M. Cervera.

         Int. J. on Comp. Methods in Material Science, 6(1-2) (2006).

https://doi.org/10.1007/978-3-540-48260-4_93

 

13.    Advances in the finite element and particle methods for bulk forming processes

         E. Oñate, J. Rojek, M. Chiumenti, S.R. Idelshon, F. del Pin and R. Aubry

         Computer Methods in Applied Mechanics and Engineering, 195 (2006) 6750-6777.

https://doi.org/10.1016/j.cma.2004.10.018

 

12.    Smeared crack approach: Back to the original track

         M. Cervera and M. Chiumenti,     

         International Journal for Numerical and Analytical Methods in Geomechanics, 30 (2006) 1173-1199.

https://doi.org/10.1002/nag.518

 

 

11.    On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity

         C. Agelet de Saracibar, M. Chiumenti, Q. Valverde and M. Cervera.

         Computer Methods in Applied Mechanics and Engineering, 195 (2006) 1224-1251.

https://doi.org/10.1016/j.cma.2005.04.007

 

10.    Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en pequeñas deformaciones

         Q. Valverde, M. Chiumenti, M. Cervera and C. Agelet de Saracibar

         Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 21(4) (2005) 345-363.

 

9.      A stabilized formulation for incompressible plasticity using linear triangles and tetrahedral

         M. Chiumenti, Q. Valverde, C. Agelet de Saracibar and M. Cervera.

         International Journal of Plasticity, 20 (2004) 1487-1504.

https://doi.org/10.1016/j.ijplas.2003.11.009

 

8.      Softening, localization and stabilization: Capture of discontinuous solutions in J2 plasticity

         M. Cervera, M. Chiumenti, C. Agelet de Saracibar,

         International Journal for Numerical and Analytical Methods in Geomechanics, 28 (2004) 373-393.

https://doi.org/10.1002/nag.341

 

 

7.      Shear band localization via local J2 continuum damage mechanics

         M. Cervera, M. Chiumenti, C. Agelet de Saracibar

         Computer Methods in Applied Mechanics and Engineering, 193 (2004) 849-880.

https://doi.org/10.1016/j.cma.2003.11.009

 

6.      Mixed linear/linear simplicial elements for incompressible elasticity and plasticity

         M. Cervera, M. Chiumenti, Q. Valverde and C. Agelet de Saracibar

         Computer Methods in Applied Mechanics and Engineering, 192 (2003) 5249-5263.

https://doi.org/10.1016/j.cma.2003.07.007

 

5.      A stabilized formulation for incompressible elasticity using linear displacement and pressure Interpolations

         M. Chiumenti, Q. Valverde, C. Agelet de Saracibar and M. Cervera.

         Computer Methods in Applied Mechanics and Engineering, 191 (2002) 5253-5264.

https://doi.org/10.1016/S0045-7825(02)00443-7

 

4.      On the constitutive modeling of coupled thermomechanical phase-change problems

         C. Agelet de Saracibar, M. Cervera and M. Chiumenti

         International Journal of Plasticity, 17 (2001) 1565-1622.

https://doi.org/10.1016/S0749-6419(00)00094-2

 

3.      Thermo-mechanical analysis of industrial solidification processes

         M. Cervera, C. Agelet de Saracibar and M. Chiumenti

         International Journal for Numerical Methods in Engineering, 46 (1999) 1575-1591.

https://doi.org/10.1002/(SICI)1097-0207(19991130)46:9<1575::AID-NME713>3.0.CO;2-D

 

 

2.      On the formulation of coupled thermoplastic problems with phase-change

         C. Agelet de Saracibar, M. Cervera, M. Chiumenti

         International journal of plasticity, 15 (1999) 1-34.

https://doi.org/10.1016/S0749-6419(98)00055-2

 

1.      On the Numerical Modeling of Frictional Wear Phenomena

         C. Agelet de Saracibar and M. Chiumenti

         Computer Methods in Applied Mechanics and Engineering, 177 (1999) 401-426.

https://doi.org/10.1016/S0045-7825(98)00390-9

 

 

 

 

Teaching Books

Estática de Estructuras. Problemas resueltos
M. Chiumenti y M. Cervera.
Editorial CIMNE (2007)
ISBN: 978-84-96736-20-7